Siemens Ersatzteile
« Zurück 1 … 24.869 24.870 24.871 24.872 24.873 … 30.420 Weiter »
A5E03893735
7ML54240XX012CA0,XX=DIN 11851 DN100 ANTENNA MATERIAL (USES ANTENNA ADAPTER):PTFE, ONE PIECE ROD ANTENNA PROCESS CONNECTION:DIN 11851 HYGIENIC THREADED FITTING CONFIGURATION/CONNECTION SIZE: DN100 HYGIENIC THREADED FITTING, DIN 11851,1.4404, PTFE SEAL FDA APPROVED ANTENNA EXTENSION:NO EXTENSION MOUNTING PARTS:COMPLETE 11851 FITTING INCLUDING LINER AND NUT FOR CUSTOMER INSTALLATION. ENCLOSURE/CABLE INLET:ALUMINUM, EPOXY PAINTED, 2X1/2"NPT,SIEMENS LUI INTERFACE COMMUNICATION /OUTPUT:4-20MA HART, START-UP AT <3
A5E03894784
MILLTRONICS MUS BELT SCALE – NICKEL PLATED LOAD CELLS MLFB: MUS, 7MH7123-1XX10, CSTM LC, 20 KG, ATEX MILLTRONICS MUS BELT SCALE, CONSTRUCTION STANDARD FOR BELT WIDTH UP TO 1000 MM (42) NICKEL PLATED LOAD CELL CAPACITY 20 KG CUST. LOAD CELL APPLICATION OF SIWAREX WL260 FABRICATION POLYESTER PAINTED MILD STEEL SIWAREX WL260 20 KG CAPACITY II 1 G EX IA IIC T4 II 1 D EX IAD 20 T73 DEGREES II 3G EX NL IIC T4
A5E03895462
WW100 INLET KIT, SPARE, FLAT SHEAR GATE INCLUDES ONE PIECE 304 STAINLESS STEEL INLET 304 SS SHEAR GATE, Y74= FLAT BOTTOM 304 SS GATE CLAMP MOUNTING HARDWARE
A5E03895565
MSI, 7MH7122-2AJ24-1A, CUSTOM PAINT SCALE CONSTRUCTION HAZARDOUS DUTY CSA / FM CLASS II, DIV. 1, GROUPS E, F, G AND CLASS III BELT WIDTH AND 'A' DIMENSION 26, 'A' = 35 (889 MM) LOAD CELL CAPACITY 100 LB (45.4 KG) FABRICATION CUSTOM PAINT (COMPATIBLE WITH MWL WEIGHT CALIBRATION SYSTEM) SYSTEM SPECIFICATION STANDARD MSI AND MMI CUSTOM PAINT: DEGREE OF RUST REMOVAL, SA 2.5 PRIMER, ALKYDE RESIN
A5E03895581
MSI, 7MH7122-2BK24-1A, CUSTOM PAINT SCALE CONSTRUCTION HAZARDOUS DUTY CSA / FM CLASS II, DIV. 1, GROUPS E, F, G AND CLASS III BELT WIDTH AND 'A' DIMENSION 48, 'A' = 57 (1448 MM) LOAD CELL CAPACITY 100 LB (45.4 KG) FABRICATION CUSTOM PAINT (COMPATIBLE WITH MWL WEIGHT CALIBRATION SYSTEM) SYSTEM SPECIFICATION STANDARD MSI AND MMI CUSTOM PAINT: DEGREE OF RUST REMOVAL, SA 2.5 PRIMER, ALKYDE RESIN
A5E03895608
MWL, 7MH7218-1AJ31-1, CUSTOM PAINT ACTUATION MANUALLY BELT WIDTH AND A DIMENSION 26, 'A'= 35 (889 MM) WEIGHT TYPE FOR USE WITH 3 INTEGRATED ROUND BAR WEIGHT (18-29, 15.9-22.7 KG) FABRICATION CUSTOM PAINTED MILD STEEL CUSTOM PAINT: DEGREE OF RUST REMOVAL, SA 2.5 PRIMER, ALKYDE RESIN
A5E03895611
MWL, 7MH7218-1BK63-1, CUSTOM PAINT ACTUATION MANUALLY BELT WIDTH AND A DIMENSION 48, 'A'= 57 (1448 MM) WEIGHT TYPE FOR USE WITH 6 INTEGRATED ROUND BAR WEIGHT (42-53, 131.8-154.8 KG) FABRICATION CUSTOM PAINT MILD STEEL CUSTOM PAINT: DEGREE OF RUST REMOVAL, SA 2.5 PRIMER, ALKYDE RESIN/
A5E03895622
RBSS, 7MH7134-2AB22, CUSTOM PAINT MODEL:60 PULSES PER REVOLUTION FABRICATION CUSTOM PAINT MILD STEEL MOUNTING OPTIONS WITH MOUNTING KIT APPROVALS CE, C-TICK, ATEX II 1 G, EEX IA IIC T6, ATEX II 1D EX IAD 20 T108 C, CSA/FM SWITCH ISOLATOR 230 V AC, REQUIRED WITH RBSS IS CUSTOM PAINT: DEGREE OF RUST REMOVAL, SA 2.5 PRIMER, ALKYDE RESIN / ZINC
A5E03899350
7ML57281MX215AB0, X=DN125 PN6 FLANGE PROCESS TEMPERATURE UP TO +80 C (+176 F) POWER SUPPLY 24 V DC, 1 REV/MIN., FAIL-SAFE PROCESS CONNECTION DN125 PN 16, EN1092-1 (1.4541/321) PROCESS PRESSURE UP TO 5 BAR (72.5 PSI) PROCESS CONNECTION MATERIAL STAINLESS STEEL 303 (1.4305) EXTENSION LENGTH 300 MM (11.81) MEASURING VANE RECTANGULAR VANE, 50X98MM (1.97X3.86) APPROVALS ATEX II 1 /2 D, C-TICK
A5E03905351
7ML57474CXXX1BA0-Z,Y01,Y17, DN50,PN63,Y0,Y01=220MM,XXX= DN50PN63 EN1092-1, TYPE H SITRANS LVL200, RIGID EXTENSION ELECTRONICS: NAMUR SIGNAL APPROVAL: ATEX II 1G, 1/2G, 2G EEX IA IIC T6 + WHG PROCESS CONNECTION / MATERIAL FLANGE DN50 PN63 EN1092-1 TYPE H. Y01=220MM THIS FLANGE IS RATED FOR 37.9 BAR MADP
A5E03905355
7ML57474CXXX1BA0-Z,Y01,Y17 DN50,PN63,Y01=230MM XXX=DN50PN63 EN1092-1 TYPE H ELECTRONICS NAMUR SIGNAL APPROVAL ATEX II 1G, 1/2G, 2G EEX IA IIC T6 + WHG PROCESS CONNECTION / MATERIAL FLANGE DN50 PN63 EN1092-1 TYPE H Y01=230MM
A5E03905356
7ML57474CXXX1BA0-Z,Y01,Y17, DN50,PN63,Y01=240MM, XXX=DN50PN63 EN1092-1 TYPE H ELECTRONICS NAMUR SIGNAL APPROVAL ATEX II 1G, 1/2G, 2G EEX IA IIC T6 + WHG PROCESS CONNECTION / MATERIAL FLANGE DN50 PN63 EN1092-1 TYPE H Y01=240MM
Ersatzteilservice von GOHR-SPS:
Wir liefern weltweit und zu jeder Zeit incl. Zollabfertigung.
Vorab stehen wir Ihnen gerne für eine telefonische Beratung zur Verfügung.
Nutzen Sie hierfür unser Kontaktformular oder rufen Sie uns gerne an!
Zahlung
auf Rechnung
Weltweiter
Versand
Angebote innerhalb
von 12 Stunden
Schnelle
Lieferung