Siemens Ersatzteile
« Zurück 1 … 24.848 24.849 24.850 24.851 24.852 … 30.420 Weiter »
A5E03488620
LR200 WITH 300MM SHIELDED ROD MLFB: 7ML54231MAX13CE0, X=300MM SS SHIELD ANTENNA MATERIAL- PTFE-USES ANTENNA ADAPTER AND ADDITIONAL PROCESS CONNECTION BELOW PROCESS CONNECTION- 2" NPT ((TAPER), ANSI/ASME B1.20.1) ANTENNA EXTENSIONS-300 MM 316L STAINLESS STEEL SHIELD PROCESS SEAL/GASKET-FKM O-RING ENCLOSURE/CABLE INLET- ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5 COMMUNICATION/OUTPUT 4-20MA HART, START-UP AT <3.6MA APPROVAL CSA CLASS I AND II, DIV I, GROUPS A, B, C, D, G, 6.3 GHZ
A5E03490114
7ML55170AC241AA1,CRYOGENIC VERSION: Y01 = 600MM, 16MM PFA INSULATED ROD PROCESS CONNECTION: 2" ASME 300LB FLANGE, SINGLE PIECE FLANGE, RAISED FACE APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLSOURE/CABLE INLET: 2 X 1/2" NPT IP68 OPTIONS: NONE THERMAL ISOLATOR: PROVIDED WITH THERMAL ISOLATOR ELECTRICAL OUTPUT: 2-WIRE LOOP CURRENT 4 TO 20 MA (TRANSMITTER MSP2002-2_3300 PF) Y02: 50MM EXTRAS: CRYOGENIC TEST CERT. (TESTED IN LIQUID NITROGEN AT -196 C) PROVIDED
A5E03495458
X7MR-A220-082 – GUIDED WAVE RADAR RIGID OVERFILL SERVICE PROBE. X = 2" G BSPP
A5E03496532
7ML56031AA141AA0,CRYOGENIC ELECTRONIC TRANSMITTER: MSP2002-1 (330 PF) PROCESS CONNECTION: 2 ASME, 150LB SINGLE PIECE RAISED FACED FLANGE, 316L SS PROBE INSULATION: PFA INSULATION APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6…T1 PROBE/ELECTRODE DIAMETER: 16MM (0.63) RIGID ROD, Y01 = 350MM, Y02 = 100MM THERNAL ISOLATOR: PROVIDED WITH RIGID THERMAL ISOLATOR EXTRAS: PROVIDED WITH CRYOGENIC TEST CERTIFICATE
A5E03497926
LR200 FLANGED HORN VERSION, PFA COATED PROCESS CONNECTION ANTENNA MATERIAL – (USES ANTENNA ADAPTER) PFA COATED 316L STAINLESS STEEL WITH PTFE CONE EMITTER AND PURGE CONNECTION WITH 1/8" NPT INLET PROCESS CONNECTION DN 200 PN 16, TYPE A, FLAT FACED COMMUNICATION/OUTPUT 4-20MA HART, START-UP AT <3.6MA PROCESS SEAL/GASKET FKM (-40 TO +200 C) ENCLOSURE/CABLE INLET ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5 HORN/WAVEGUIDE-200MM(8")HORN APPROVAL GP, CE PRESSURE-0.5BAR(7.25PSI) MAX
A5E03498053
7ML5513XXL062BA1,XX=20M VERSION: XX = 20,000MM PFA INSULATED CABLE, WEIGHTED PROCESS CONNECTION: G 1.5" ((BSPP), EN ISO 228-1/PF (JIS-P), JIS B 0202) APPROVALS: FM CLASS I, DIV. 1, GROUPS A, B, C, D,T4 ENCLOSURE/CABLE INLET: 2 X M20 X 1.5 (IP68, ADAPTER) OPTIONS: WITH MOUNTING EYE (TO FIX THE CABLE SENSOR STRAIGHT) THERMAL ISOLATOR: WITHOUT THERMAL ISOLATOR OR REMOTE ELECTRONICS ELECTRONIC OUTPUT: 2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2_ 3300 PF)
A5E03502112
MSI,CUSTOM,2007MM DYNAMIC BEAM,2248MM STATIC BEAM CUSTOM MSI, EPOXY POWDER COATED MILD STEEL, 2007MM DYNAMIC BEAM AND 2248MM STATIC BEAM, 1500 LBS LOADCELLS, STANDARD DUTY, WITH MWL FLATBAR CALIBRATION WEIGHT BRACKETS, NO HANGER BRACKETS JC26739KE FOR DIMENSIONS
A5E03502175
7ML5425XDA213CE1,X=1300MM SLIDING WAVEGUIDE ANTENNA MATERIAL: SLIDING WAVEGUIDE SYSTEM WITH 1300 MM WAVEGUIDE PROCESS CONNECTION DN 150 PN 16, TYPE A, FLAT FACED COMMUNICATION/OUTPUT 4-20MA HART, START-UP AT <3.6MA PROCESS SEAL/GASKET NITRILE (-40 TO +100 C), SLIDING WAVEGUIDE SYTEMS ONLY ENCLOSURE/CABLE INLET ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5, SIEMENS LUI INTERFACE HORN SIZE/WAVEGUIDE OPTIONS 100 MM (4") HORN, FOR STILLPIPE APPLICATIONS ONLY APPROVAL ATEX II 1 G EEX IA IIC T4, IS WITH BARRIER
A5E03506940
MWL,7MH7218-1CE111, SPECIAL HANDLE MWL FOR FLAT BAR CALIBRATION WEIGHTS, BW = 1624MM "A" = 1854MM SPECIAL 357MM LONG CRANK HANDLE REFER TO CUSTOMER DWG JC26739KE FOR DIMENSIONS
A5E03506989
7ML13032AXX21AC0,XX=DN80 PN25/40 FORM E MODEL: HIGH TEMPERATURE/ HIGH PRESSURE SINGLE ROD MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROCESS CONNECTION: XX = DN80 PN25/40, EN1092 FORM E (SPIGOT FACE), 316 SS O-RING: AEGIS PF 128 PROBE INSERTION LENGTH: Y01 = 300CM, PROBE PROVIDED IN 3 SECTIONS CERTIFICATES:C12 -ACCEPTANCE CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN10204 APPLICATION DETAILS: PROCESS PRESSURE: 1 – 24BAR PROCESS TEMP:-40 C TO 60 C
A5E03510451
M500,50LB,304STAINLESS STEEL AND POLYURETHANE LINER 7MH7116-2AB1. M500 FLOWMETER, MILD STEEL HOUSING, 304STAINLESS STEEL SENSING PLATE WITH POLYURETHANE LINER, 50 LB LOADCELL NOTE: COMES WITH ATEX EQUIVALENT CERTIFICATE FOR THE LOADCELLS ONLY AS THEY ARE THE ONLY ELECTRICAL COMPONENT ON THIS UNIT. THE MECHANICAL CONSTRUCTION HAS NO IMPACT ON THE APPROVAL.
A5E03510715
7ML11061XA200L,X=70M PROCESS CONNECTION: 1" NPT ((TAPER), ANSI/ASME B1.20.1) CABLE LENGTH: X = 70M CABLE FACING:STANDARD (CSM RUBBER) APPROVALS: FM CLASS I, ATEX II 2G, CSA CLASS I DIV. 2, SAA CLASS I MOUNTING FLANGE: DN 150, PN 10/16, TYPE A, FLAT FACED
A5E03517329
TEST CHAIN,15LB/FT,12.33', 4"PITCH,BUSHED 7MH7161-0DD30-Z – Y01 = 12.33 FT ALL PARTS TO BE NICKLE PLATED
A5E03518307
7ML13011AA411XX0,XX=DN100 PN40 FORM E MODEL: COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 320 CM O-RINGS: VITON PROCESS CONNECTION: DN 100 PN40, EN1092-1 FORM E FLANGE
A5E03518308
7ML13011AA311XX0,XX=DN100 PN40 FORM E MODEL: COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 300 CM O-RINGS: VITON PROCESS CONNECTION: DN 100 PN40, EN1092-1 FORM E FLANGE
Ersatzteilservice von GOHR-SPS:
Wir liefern weltweit und zu jeder Zeit incl. Zollabfertigung.
Vorab stehen wir Ihnen gerne für eine telefonische Beratung zur Verfügung.
Nutzen Sie hierfür unser Kontaktformular oder rufen Sie uns gerne an!
Zahlung
auf Rechnung
Weltweiter
Versand
Angebote innerhalb
von 12 Stunden
Schnelle
Lieferung