Siemens Ersatzteile
« Zurück 1 … 24.836 24.837 24.838 24.839 24.840 … 30.420 Weiter »
A5E03094252
7ML54231BAX13AA0,C11,X=450MM STAINLESS STEEL SHIELD ANTENNA MATERIAL: PTFE PROCESS CONNECTION: DN 80 PN 16, TYPE A, FLAT FACED EXTENSIONS / SHIELD: 450 MM EXTENSION, 316L SS SHIELD PROCESS SEAL: FKM DISPLAY/CABLE INLET:LUI/M20 COMMUNICATION: HART APPROVALS:GP, CE PRESSURE RATING:16 BAR AT 20C, PRESSURE TESTED CERTIFICATES: C11
A5E03094253
LR200 WITH 810MM SHIELDED ROD ANTENNA ANTENNA MATERIAL: PTFE PROCESS CONNECTION: DN 80 PN 16, TYPE A, FLAT FACED EXTENSIONS/SHIELD: 810 MM EXTENSION,316L STAINLESS STEEL SHIELD PROCESS SEAL: FKM DISPLAY/CABLE INLET:LUI/M20 COMMUNICATION: HART APPROVALS:GP, CE PRESSURE RATING: 16 BAR AT 20C, PRESSURE TESTED CERTIFICATES: C11
A5E03099589
7ML13012AE223XX0; XX=DN50 PN16 RF; 112CM C12, C18, D07, Y15, LIQUID PENETRANT CERT MODEL COAXIAL: HIGH TEMPERATURE / HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316 / 316L SS PROBE AND PROCESS CONNECTION PROBE INSERTION: Y01=112CM O-RINGS: NONE PROCESS CONNECTION: XX = DN50 PN16 RAISED FACE FLANGE
A5E03099590
7ML13012AE223XX0; XX=DN50 PN16 RF; 182CM C12, C18, D07, Y15, LIQUID PENETRANT TEST MODEL COAXIAL: HIGH TEMPERATURE / HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316 / 316L SS PROBE AND PROCESS CONNECTION PROBE INSERTION:Y01=112CM O-RINGS: NONE PROCESS CONNECTION:XX=DN50 PN16 RAISED FACE FLANGE
A5E03118474001
MAXUM SSSI SIEMENS I2C BUS INTERFACE EINBAUTEIL: GEDICHTETE KABELDURCHFUEHRUNG ZWISCHEN GC UND KLEMMBOX
A5E03118594
7ML56300AX000HA0,X=REINFORCED FURTHER DETAILS CAN BE FOUND ON THE CORRESPONDING BUDGETARY QUOTE PREVIOUSLY PROVIDED BY PVC TO THE REGION. PLEASE TAKE SPECIAL CONSIDERATION OF THE REVISION NUMBER
A5E03119420
7ML50331AA001C,3 TAGS,CERTS, PRE-PROG. VERSION: MULTIRANGER 100, LEVEL MEASUREMENT ONLY MOUNTING, ENCLOSURE DESIGN: WALL MOUNT,STANDARD ENCLOSURE INPUT VOLTAGE:100 TO 230 VAC NUMBER OF MEASUREMENT POINTS: SINGLE POINT VERSION DATA COMMUNICATIONS: WITHOUT MODULE OUTPUT RELAYS: 3 RELAYS (2 FORM A, 1 FORM C), 250 VAC APPROVALS: ATEX II 3D CERTIFICATES: C11 AND PRE-PROGRAMMED CERTIFICATE PROVIDED
A5E03120231
7ML56300CXY00FA0, X=REINFORC,Y= FURTHER DETAILS CAN BE FOUND ON THE CORRESPONDING BUDGETARY QUOTE PREVIOUSLY PROVIDED BY PVC TO THE REGION. PLEASE TAKE SPECIAL CONSIDERATION OF THE REVISION NUMBER
A5E03121244
7ML56300AX000FA0,X=REINFORCED FURTHER DETAILS CAN BE FOUND ON THE CORRESPONDING BUDGETARY QUOTE PREVIOUSLY PROVIDED BY PVC TO THE REGION. PLEASE TAKE SPECIAL CONSIDERATION OF THE REVISION NUMBER
A5E03121245
7ML56300AX000GA0,X=REINFORCED FURTHER DETAILS CAN BE FOUND ON THE CORRESPONDING BUDGETARY QUOTE PREVIOUSLY PROVIDED BY PVC TO THE REGION. PLEASE TAKE SPECIAL CONSIDERATION OF THE REVISION NUMBER
A5E03121246
7ML56300CX000FC0,X=REINFORCED FURTHER DETAILS CAN BE FOUND ON THE CORRESPONDING BUDGETARY QUOTE PREVIOUSLY PROVIDED BY PVC TO THE REGION. PLEASE TAKE SPECIAL CONSIDERATION OF THE REVISION NUMBER
A5E03121247
POINTEK CLS200 – STANDARD – STABAUSFUEHRUNG MIT GEWINDE- ODER FLANSCHPROZESSANSCHLUSS: VIELSEITIGER, KAPAZITIVER FUELLSTANDSCHALTER MIT INVERSE FREQUENCY SHIFT TECHNOLOGIE, MIT OPTIONALEN STAB-/SEILSONDEN UND KONFIGURIERBAREM AUSGANG, IDEAL FUER DIE ERFASSUNG VON FLUESSIGKEITEN, SCHUETTGUETERN, SCHLAEMMEN, SCHAUM UND TRENNSCHICHTEN
A5E03121248
7ML56300CX000HC0,X=REINFORCED FURTHER DETAILS CAN BE FOUND ON THE CORRESPONDING BUDGETARY QUOTE PREVIOUSLY PROVIDED BY PVC TO THE REGION. PLEASE TAKE SPECIAL CONSIDERATION OF THE REVISION NUMBER
A5E03124827
7ML54120AC001AA0 ANTENNA MATERIAL: PTFE, ONE PIECE ROD ANTENNA PROCESS CONNECTION: SANITARY FITTING CLAMPS CONFIGURATION/CONNECTION SIZE: 4" (101.6MM) CONNECTION, ROD ANTENNA ONLY ANTENNA EXTENSION: WITHOUT ANTENNA EXTENSION MOUNTING CLAMP: NO MOUNTING CLAMP ENCLOSURE/CABLE INLET: ALUMINUM, EPOXY PAINT, 2 X M20 X 1.5 COMMUNICATION/OUTPUT: 4-20 MA, HART MODBUS APPROVAL: GENERAL PURPOSE, CE, CSA
A5E03125664
7ML56525KX000GA0-Z, Y01-2000 PROCESS CONNECTION 3" ASME, 150 LB, WELDED FLANGE, 316L STAINLESS STEEL, RAISED FACE PROBE LENGTH: Y01-2000MM WETTED SEALS GRAPHITE PROBE MATERIAL: 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS:CSA/FM CLASSI, DIV.1, GR.A,B,C,D, CSA/FM CLASS II, DIV. 1, GR. E, F, G, CSA/FM CLASS III T4 ENCLOSURE AND LID: ALUMINUM EPOXY COATED 2 X 1/2" NPT VIA ADAPTER – CABLE INLET, IP65 ACTIVE SHIELD LENGTH STANDARD LENGTH – 105 MM
Ersatzteilservice von GOHR-SPS:
Wir liefern weltweit und zu jeder Zeit incl. Zollabfertigung.
Vorab stehen wir Ihnen gerne für eine telefonische Beratung zur Verfügung.
Nutzen Sie hierfür unser Kontaktformular oder rufen Sie uns gerne an!
Zahlung
auf Rechnung
Weltweiter
Versand
Angebote innerhalb
von 12 Stunden
Schnelle
Lieferung